led warning beacon light

LED warning beacon light

The led warning beacon light is mainly composed of four parts, the cover, the base, the light source and the wiring harness. Some beacon lights have a stainless steel protective cover on the outside, the purpose of which is to prevent the surface of the outer cover from scratching. Beacon lights can install on the top or surrounding warning lights of emergency vehicles. Of course, some beacon lights are installed on interior car to warn people inside the vehicle. Beacon lights with different appearances and shapes, so can install on different positions. It can install on different emergency vehicles, such as ambulances, police cars, firefighting, or municipal engineering, airports, high-speed patrol vehicles etc.. Therefore, the beacon warning lights have different colors and flashing methods, it can custom according to needs. In addition to the beacon lights installed on emergency vehicles, we can also provide warring lights of  police motorcycles.

The light source types of beacon lights are halogen lamps and LED lamps. With the development of society, LED lamps are the main form at present. LED light sources have low-power and high-power light sources. The most common is high-power LED, and LED has 0.2 W/PCS, 0.5W/PCS, 1W/PCS, 3W/PCS, 5W/PCS are the most used.

The main features of led warning beacon light is as follows:

1. The luminous standard reaches CLASS2
2. There are DC12V, DC24V, DC 9-32V
3. The color of the light source has two forms, one is that the outer cover is transparent, and the LED is selected according to the color. The colors are red, blue, yellow, green, and white. The other is that the outer cover is selected by color, the colors are red, blue, yellow, green, and transparent, and the color of the LED light source is white.
4. Luminous mode: flash and steady lighting
5. Flashing frequency: There are 10-18 kinds of flashing frequencies with different speeds by default. It is mainly selected according to the needs of customers. You can choose the default, alsocanchoose to switch between different flashing modes, or fixed with a single flashing mode.

Power of led beacon lights:

According to the user’s installation requirements, the power parameters of the lamp are as follows:

Small lamp power: According to different types of beacon light, there are 4-60W, etc., power = quantity * N / PCS, the quantity is the total number of LEDs on a lamp, and N is the power of a single LED.