Aole has two types of car pa system, split sirens and integrated sirens. In addition,
If the siren for cars is use with the police light bar, it can directly control the flashing of the lights
The vehicle pa system is the carrier of the pa speaker for cars, and the police siren box matched with the speakers . And also can buy it from Aole.
You can also match it yourself. But you need to pay attention to the same power of the two products, otherwise it will damage product life
You can hear different siren sounds in the Aole siren, including the basic 8 tones. Therefore the siren for sale can use in many different occasions, such as fire fighting, ambulance, police, engineering, etc.
In addition, In the municipal sanitation, also can provide some special music siren.
Why choose Aole car pa system
Over 30 years of emergency safety equipment manufacturing experience
Support customization
Have a technical team, capable of independent research and development
Provide factory price for car pa system
Car pa system FAQS
Getting a PA system for a car may seem like a difficult task. It requires effort and research. You might find yourself with a ton of questions, but no answers to these car PA questions. A car PA system is a great addition to most vehicles, including trucks, emergency vehicles, police cars, army vehicles and others!
In the next article, we will briefly explain the situation of the siren, but for the specific situation of the siren, please check the sales page of the 12V siren for sale.
Why Should You Choose Aole Siren?
Aole Siren has 30 years of experience in the siren manufacturing industry, so our company has a deep understanding of what needs to be done. We ensure high quality products that provide our customers with the best experience they would ever want. Our emergency safety equipment has been designed to get the job done effectively and satisfactorily. Aole Siren also supports customers in fulfilling all of their customization desires.
We provide affordable prices for most of our products and we even provide arrow panels at a factory rate. Finally, our team is filled with experts who are constantly researching and developing new ways to improve upon products. Our team is the backbone of the company, so we ensure that our designs and products are always masterfully created by some of the most genius minds in the siren control box industry.
Categories of Police Sirens
A police car PA system needs to always run smoothly because it is an integral part of any police car. For your specific needs, you need to understand the difference between an integrated police siren and a split police siren.
An integrated police siren is operated through the panel. It is controlled with the use of buttons that are located on the panel. Of course, different buttons have different functions.
On the other hand, a split police siren is operated with the handle. The handle allows the user to control the siren from a distance as well (for example, someone sitting in the backseat can also use the handle). The siren’s functions can be changed through the handle. This siren is more convenient because of the handheld microphone and controller.
When buying a high quality siren, you need to make sure that your siren has a number of sounds for you to choose from. Siren sounds are available as yelps, wails, hi-los, power calls, air horns, piercers and howlers.
What are the Accessories of Siren Horns?
Fuses and screws are supposed to come with your car PA. You can also request a manual from the company you are buying from.
When your siren gets a short circuit, a fuse should be readily available for an easy change. A spare fuse will be convenient for you to use and it will restore your siren whenever necessary. However, before you change the fuse, check to see if the main circuit board is not damaged in any way. In such a case, the entire board would require a replacement.
Screws can also be replaced when necessary and spares are needed in case of any such emergency. Screws; however, may not be needed as often as a spare fuse.
Finally, your manual will be needed for instructions on how to actually use the functions of the siren and how to use the panel or handle for its control. The manual will also contain other instructions that would be of great use.
Functions of Sirens
As mentioned above, It can control through panels and buttons on the handle of the siren directly. There are two basic functions of sirens and when you shop for your own, you should have your preference in mind.
Reminders are usually available in eight tones of car pa system. Reminders are most frequently used by emergency vehicles, like ambulances to inform pedestrians and other cars on the road that an emergency is occurring. When the vehicle is in a hurry to reach an emergency or when there are passengers present who are going through a medical emergency.
Another function that sirens serve is as a warning alarm. Alaways the police most use the warning function of the car pa system. This function is an easy way for the police to warn a criminal or car that the police is on their tail and requires them to come to a halt.
In addition, the appearance of the police siren cannot be modified as our products are regulated by SAE laws and regulations. This ensures that all sirens meet the requirements of the job.
What Products can pair withe the emergency vehicle siren
Pa speaker for cars can pair with emergency vehicle sirens, a police light bar and even speakers for better car audio.
Quality Inspection for Police Sirens
Police sirens go through the following steps during quality inspection:
- Check the appearance of the upper cover by placing it on a flat surface.
Free of the scratches of the cover, dust particles, deformations, bubbles and other defects. The label should be clear and easy to read.
- Check both sides of the cover.
Smoothly of the surface, free from peeled paint, dust particles and rust. Screws should not be loose, oxidized or rusty. Wires should be tight and taut in place. The coloring of the wiring harness should meet specified requirements.
- Plug the product’s power cord and lamp control line in and connect the adapter.
Free from scratches of the handle and bottom plate, unsatisfactory spraying and other defects.
- Adjust the siren’s switch.
Touch the handle’s power switch and adjust the panel. Press 1 to 7 and observe the conversion cycle from high to low frequency. Test to see if the alarm meets the requirements. Then, turn the volume button to the highest volume and listen to the PA speaker system for car. The tone of the siren, oscilloscope waveform and AC voltmeter should be within the normal range.
- Adjusting the tone.
Push the overtaking siren button on the panel to switch tones. Once you release the button, you will return to the current tone. Next, you can touch the main light, auxiliary light button to turn on the corresponding indicator. It should turn on normally and the negative ammeter should be less or equal to 8A.
- Finally, hold the microphone handle.
Press the microphone button and speak into the microphone gently. Observe the oscilloscope waveform while doing so. Then, check the indicator lights and loudspeakers.
How to Place an car pa system Order
Orders can be easily placed through the Aole website by adding a product to your cart, using the “Contact Us” window or chatting with one of our customer representatives. Aole Sirens knows what the customer needs, so we take pride in our customer service and satisfaction. If you have any questions about our products, feel free to contact us directly.
Car Pa System Sample Orders
Anyone in search of the best car PA system knows that a sample is required before they can actually commit to a specific company. Luckily, Aole Sirens entertains sample order requests, but there are only two options for such orders. Customers can either choose from one of the already available products or provide us with a custom order. Then, the car siren horn goes through our research and development team, who create a sample that is ready to ship to the customer. The customer is also in charge of providing us with a price they would like to pay for the order.
How Long Does it Take for Delivery?
The delivery time depends on how long the development and production processes will take. These processes can vary according to the specifications of the product, its model and the quantity ordered. Delivery can take anywhere between 3 to 15 days depending on the order that has been placed. Our salespeople can answer any and all questions regarding delivery time. For an accurate estimation,
Product Certification
Aole Sirens has several product certifications. To meet the needs of the European and American markets, we have obtained CE and SAE certifications respectively. For our factory, we have obtained IATF16949 certification. This certification gives customers clarity about the legitimacy of our business.
What to do When a New Customer Places an Order
When a new customer places an order, Aole Sirens pays close attention to the specifications of the order, including the payment method, mode of delivery and amount ordered. Sometimes, a customs declaration from the importer requires the importer to provide material and tests. We require the test reports before we can begin processing the order.
What Happens if An order is not Paid for Before Delivery?
If a customer does not clear the bill before delivery, we are forced to cancel the order as we do not accommodate post-delivery payments.
Confirm and place the order after, And the customer provide us with the relevant raw materials, which is then manufactured into the product that was ordered. Once research and product manufacturing is complete, the order is ready for delivery.
What is the Difference Between a Police and an Ambulance Siren?
Police sirens make use of three or more siren sounds, including a wailing sound, the high to low and low to high sounds. In some countries, these may have different meanings. On the other hand, ambulances only use one siren sound in most countries around the world. This universality allows for instant recognition by people on the road, so they can make way.